Showing posts with label data center migration using snapmirror. Show all posts
Showing posts with label data center migration using snapmirror. Show all posts

Thursday, 10 November 2011

Snapmirror Secondary or Destination configuration of VSM & QSM

Snapmirror Secondary or Destination configuration of VSM  (Volume snapmirror)

primary controller name : src
Secondary controller name : dst

primary controller IP : 192.168.1.2
Secondary controller IP : 192.168.1.3

primary &Secondary  aggregate name: aggr1
primary &Secondary Vol name:vol1

Dst volume size should be same or grater than  the Source  volume

sec>  aggr create aggr1 20
sec>  aggr status
sec>  vol create vol1 aggr1 1g
sec>  vol status

sec>  wrfile -a \etc\hosts 192.168.1.2 src
sec>  ping 192.168.1.2
sec>  ping src

sec>  cifs shares -add vol_share2 /vol/vol1
sec>  cifs shares
sec>  vol restrict vol1
sec>  license add (snapmirror license no)
sec>  license
sec>  snapmirror initialize -S src:vol dst:vol1
sec>  snapmirror status


Switch to windows

Go to Run-> \\dst\vol_share2      # open this path

Now data started copying.




Note :

1. Before Migrate command please check both src and dst datas are in same size and check the total no of file manually.
2. snanpmirror Migrate :  command will release the relationship between src and dst and it will delete the base snapshot from on both side.


Last command:


sec>  snapmirror update  src:vol1 dst:vol1
sec>  snapmirror migrate  src:vol1 dst:vol1






Snapmirror Secondary configuration of QSM (Qtree snap mirror)

sec>  aggr create aggr1 20
sec>  aggr status
sec>  vol create vol1 aggr1 1g
sec>  vol status

sec>  wrfile -a \etc\hosts 192.168.1.2 src
sec>  ping 192.168.1.2
sec>  ping src

sec>  qtree create /vol/vol/qtree
sec>  cifs shares -add qtree_dst /vol/vol1/qtree
sec>  cifs shares
sec>  vol restrict vol1
sec>  license add (snapmirror license no)
sec>  license
sec>  snapmirror initialize -S src:\vol\vol1\qtree dst:\vol\vol1\qtree
sec>  snapmirror status

Switch to windows


Go to Run-> \\dst\vol_share2      # open this path

Now data started copying.

Note :
1. Before migrate command please check the both src and dst datas are in same size and check the total no of file manually.
2. snanpmirror migrate :   command will release the relationship between src and dst and it will delete the base snapshot from on both side.


Last command:


sec>  snapmirror update  src:\vol\vol1\qtree dst:\vol\vol1\qtree
sec> snapmirror migrate  src:\vol\vol1\qtree dst:\vol\vol1\qtree




                                                                                  Snapmirror Sync, Async, Semi-sync configuration